Six Signs Your Furnace Heat Exchanger Has Gone Bad
Furnaces rely on a heat exchanger to provide warm air throughout your home. It is an essential part of your heating system, and any issues with it will not only lead to a breakdown of your furnace but also pose serious risks to the health and safety of your home.
Your furnace combusts gas in a sealed chamber in order to create heat. The heat exchanger plays the integral role of shielding toxic “flue gases” (the gas and combustion fumes) from entering the blower, which distributes warm air through the ducts and vents of your home. To work properly and prevent these unhealthy gases from escaping, the heat exchanger must have an air-tight seal to keep contamination away from your breathing air.
If you think your furnace may be failing, or suspect the heat exchanger is damaged, call Your Plumber to schedule an inspection.
How and Why Heat Exchangers Fail
A common reason your heat exchanger will fail can simply be a dirty, clogged air filter. A clogged air filter restricts airflow through the furnace and overheats the heat exchanger, which eventually results in stress cracks.
Also, it is important that your furnace is sized appropriately for your home. An over-sized furnace can also cause overheating and crack the heat exchanger.
However, the most common reason that a heat exchanger will crack is just normal wear and tear. Heat exchangers, made of metal, go through continuous expansion (as it heats up) and contraction (as it cools). Over a span of time, this will simply cause the metal to fatigue and crack. Manufacturers recommend a service life of a gas furnace to be between 15-20 years. To help prolong the life of your furnace, schedule yearly inspections and change your air filters annually, at minimum.
A cracked heat exchanger poses a serious threat to the safety of your home. If there's a crack in one of the cells of the heat exchanger, the gases being burned – carbon monoxide, sulfur dioxide, nitrous oxide – could leak into your home, causing illness or, in extreme cases, death.
Six Signs Your Furnace Heat Exchanger May be Cracked
Strange smells. A malfunctioning heat exchanger will often create an unpleasant and strong odor that smells similar to formaldehyde.
Soot Build-up. White soot build-up in or around the burners of your furnace.
Corrosion & Cracks. If you find corrosion or cracks in other components of your furnace, such as the draft diverter box or inducer motor, call us immediately.
Change in the flame appearance. In most furnaces, you can see the flame that heats your air. Remember: blue is normal, orange or yellow is not.
Audible Sounds. If you have a crack in the heat exchanger, you are likely to hear a rattling noise as your thermostat turns on the heat. Because the heat exchanger is made out of metal, as it is heated cracks will expand/contract, and can cause rattling, popping, and/or banging noises.
Presence of Carbon Monoxide. Carbon monoxide (CO) is an odorless, colorless, and tasteless flammable gas which is toxic. A failed heat exchanger may leak CO into your home. Only a carbon monoxide detector or alarm will alert you of the presence of CO; however, do not completely rely on a CO alarm to discover a failed heat exchanger – we recommend yearly inspection of your furnace and heating system.
What are my options?
If your heat exchanger has gone bad, you have two options: replace the heat exchanger or replace the furnace. If it is available, the best way to repair a cracked heat exchanger is to remove the damaged cell and replace it. However, it is possible that other parts and controls in the furnace may also be in need of replacement at this point. Often this is a repair that is too expensive compared to replacing the whole furnace and while bringing it up to current code requirements.
Reach out to Your Plumber if you have any questions – your family’s health and safety is our top priority.